19% Off
Jeweler’s Use strip Cutting Machine
$430.00
In StockLight duty strip cutter :
– STRIP THICKNESS From 0.05 mm upto 1 mm in GOLD.(9K TO 24K)
– STRIP WIDTH From 3.5mm upto 55mm
– Can be used for Silver/Aluminium/ Zinc/ Brass/ Copper with CAUTION!(.i.e @ 40-50% reduced thickness for harder metals.
Machine weight :- 21kg
Packed weight : 34kg
Packed Size : 15″X9″X9″
Note :
– Above considerations are for PURE METALS only…& NOT ALLOYS.
– Machine weights may vary slightly.
– Packaging weights may vary by 1kg-4kg depending on weather conditions & available wooden packaging inventory.
Description
Light duty strip cutter :
– STRIP THICKNESS From 0.05 mm upto 1 mm in GOLD.(9K TO 24K)
– STRIP WIDTH From 3.5mm upto 55mm
– Can be used for Silver/Aluminium/ Zinc/ Brass/ Copper with CAUTION!(.i.e @ 40-50% reduced thickness for harder metals.
Machine weight :- 21kg
Packed weight : 34kg
Packed Size : 15″X9″X9″
Note :
– Above considerations are for PURE METALS only…& NOT ALLOYS.
– Machine weights may vary slightly.
– Packaging weights may vary by 1kg-4kg depending on weather conditions & available wooden packaging inventory.
Additional information
| Weight | 34 kg |
|---|
Related Products
-
●Tungsten pen tip ，High hardness, wear resistance and good toughness.
●Lettering depth: 0.1mm-1mm (depending on material)
●Repeat depth: 0.2mm-2mm (depending on material)
●Working principle: vibration hitting into a line
●Power cable length: 1.5M
●Working voltage: AC 220V-240V
●Working frequency: 50Hz
●Power: 15W
●Shell material: high-strength plastic$30.00 -
Color Silver
Package Dimensions 15 x 12 x 1 cm; 138 Grams
Shipping Weight 142 Grams
Item Part Number CAT6PCWXDB
Primary material Stainless Steel
Capacity 220mm Approx
Weight 138 Grams
Country INDIA$16.50 -
to make zig zag strips for jewelry strips
firm design
heavy construction$31.00 -
• 36 Dapping punches ranging in diameter from 3.5 mm to 25 mm
• 2.5″ (62mm) Cube dapping die with 21 depressions, 4.5 mm to 45 mm
• Steel forming block (62 x 62 x 50 mm) with half-round, flat, and right-angle grooves
• Half-round bending block with 10 grooves, 5 mm to 22 mm in width
• Flat Dapping die (5″ x 2.5″ x 1″) with 27 depressions, 2 mm to 24 mm diameters
• Made in India$95.00 -
Tube Vice Holder for Holding Tubes Whilst Cutting.
Includes Stop for Repeat Size Cutting
Great for Straight Edges
Goove Length 30mm
Handle Colour Can Change Without Notice
$30.00 -
This combo contains one set of 36pc metal ring sizer and one aluminum ring stick. Used to determine finger size for ring fitting The 36pc metal ring sizer set includes: US sizes 1 to 15-1/4; International sizes 1-36; Metric sizes 13-24.2mm. EU Size 41 -76 2. The aluminum ring stick includes: US sizes 1-15 in 1/4″ increments; International sizes 1-36; EU sizes 41-76; Metric sizes 13-24m
$12.99
